Floating Platform Boat Pontoon manufacturer introduces that the pipeline buoy is generally a hollow long cylinder made of stainless steel, suspended vertically in the measured medium, the mass is greater than the same volume of liquid weight, the center of gravity is lower than the geometric center, so that the buoy is always upright It is not affected by the height of the liquid. It has minimal displacement during measurement and will not float on the liquid surface, so it is also called sinker. The float is suspended at one end of the lever. The other end of the lever is vertically connected to the end of the torsion tube core shaft. The torsion tube The other end is fixed on the instrument shell. The torsion tube is a sealed output shaft. On the one hand, it can separate the measured medium from the external space; on the other hand, it can use the elastic torsional deformation of the torsion tube to turn the torque acting on the end of the torsion tube into a mandrel. Angular displacement (rotation). The buoy type liquid level gauge does not need a shaft sleeve, packing, etc. for sealing, so it can measure the liquid level in the pressure vessel.

The pipeline buoy is safe and stable, and the anti-skid design on the surface of the engineering buoy saves people from the common dangers of common wooden installations (no broken wood chips and rust nails, etc., and the four corners of the buoy are designed with arcs and obtuse angles, which is safe and stable). Plastic pontoons are versatile and can be widely used in various fields. The bearing capacity is strong, the barrel is stable and durable, and a single can provide 500kg buoyancy. The service life of this product is more than 15 years. Except for strong natural forces and artificial improper use, there is no need to spend any maintenance or repair costs. The assembly is simple, fast and flexible, and the circular and semi-circular structure can be laid with various pipes. The construction cost is reasonable and economical. From a long-term perspective, it can save a lot of cost and time for maintenance, repair, replacement and overhaul. Beautiful shape, the surface of the float can be sprayed according to your specific use requirements.

The pipeline buoy is made of imported linear low-density polyethylene raw material, which is formed by rotomolding process at one time. It has no welding seam and is durable. The main thing is that the imported PE material is non-toxic and odorless, and will not pollute the breeding water quality. The service life of this product is more than 15 years. Except for strong natural forces and artificial improper use, there is no need to spend any maintenance or repair costs; the cost is reasonable and economical. From a long-term perspective, it can save a lot of maintenance, The cost and time of maintenance, replacement and repair; beautiful appearance, the surface of the float can be sprayed according to your specific use requirements. Economical and low maintenance costs. Easy to assemble and disassemble: can be installed and removed quickly and easily. Light weight and great buoyancy. Resistant to impact, acid and alkali corrosion. Low absorption rate, simple construction, low maintenance cost, temperature range -60-80℃.